Where Is the ACD/AYC Pump and Relay on the Evo VII, VIII, IX and X?
By STANISLAV, FOUNDER, ACD/AYC PUMPS · UPDATED OCT 30, 2026
Rear left on the Evo VII–IX, rear right on the Evo X, front on US ACD-only cars. Plus where the relay, sensor and ECU are.

“Where is the ACD pump on my Evo?” sounds like a simple question, and people are often surprised by the answer: it isn’t under the bonnet with the rest of the drivetrain hardware. On most Evo VII, VIII and IX cars it lives at the back on the left, by the rear wheel; on the Evo X it’s at the back on the right; and US-market ACD-only cars have a compact pump at the front. The relay that switches it, on the other hand, is in the engine bay. Here’s where everything is, generation by generation, according to Mitsubishi’s workshop manuals and what I see every week.
Evo VII, VIII, IX — the ACD/AYC pump is at the rear left, by the left rear wheel. Evo X and Ralliart — rear right, by the right rear wheel. US-market ACD-only Evo VIII MR and IX — a compact pump at the front, behind the bumper. The pump relay is in the engine compartment on all of them.
● hydraulic unit (pump, accumulator, valves) ■ pump relay, engine compartment. Exact relay position varies by year and drive side — see the table.
Where is the ACD/AYC pump on the Evo VII, VIII and IX?
On cars with AYC (and most cars outside the US), at the back of the car on the left-hand side, tucked under the rear wheel area. It isn’t one part but an assembly Mitsubishi calls the hydraulic unit: the electric pump, the accumulator that stores pressure, the pressure sensor and the valves that send that pressure to the centre differential (ACD) and the rear differential (AYC). It hangs on a bracket hooked to the rear floor side member, and you get to it by removing the side trim in the boot.
The fluid reservoir sits next to it and is checked through the maintenance lid in the boot. Hydraulic lines run from the unit forward to the transfer case (ACD) and across to the rear differential (AYC).
The Evo VIII uses the same layout as the VII — Mitsubishi’s 2003 supplement doesn’t change it.
What about US-market Evo VIII and IX?
This is the exception that catches people out. US-market cars with ACD only — the 2005 Evo VIII MR and the US Evo IX — don’t have AYC, and they use a compact version of the pump mounted at the front, in the engine bay behind the front bumper. The reservoir is on the same bracket. Mitsubishi’s US workshop manual starts the removal with the front bumper and the air cleaner, and the hydraulic lines run straight back to the transfer case. If you own a US car and you’ve been searching the boot, this is why you couldn’t find it.
Where is the pump on the Evo X?
On the other side: rear right, between the boot and the right rear wheel arch. The factory removal procedure starts with taking off the right rear wheel, the right rear wheel-arch liner and the right side trim in the boot, which tells you how it’s packaged. The reservoir is under the small trim lid on the right side of the boot. The Lancer Ralliart, which has the same ACD system, uses the same location.
Where is the ACD pump relay?
This is the part people search for when the pump won’t run (code 81 on the VII–IX, C161D on the X). Unlike the pump, the relay is in the engine compartment on every Evo:
| CAR | PUMP (HYDRAULIC UNIT) | PUMP RELAY | POWER FEED |
|---|---|---|---|
| Evo IV–VI | Rear, behind the boot side trim (AYC only) | “AYC relay” | AYC fusible link, engine-bay relay box |
| Evo VII | Rear left, by the rear wheel arch; reached from the boot | Engine bay: next to the ABS unit (LHD) or next to fuel pump relay 3 (RHD) | Fusible link No. 7, 60 A |
| Evo VIII | As Evo VII | Engine bay, own 4-pin relay | Fusible link No. 7 |
| Evo IX | As Evo VII on AYC cars (rear left) | Engine bay, next to fuel pump relay 3 | Fusible link, 60 A |
| US Evo VIII MR / IX (ACD only) | Front: compact pump in the engine bay, behind the front bumper | Engine bay, next to fuel pump relay 3 | 60 A fusible link “Electric pump” |
| Evo X / Ralliart | Rear right, between the boot and the right rear wheel arch | Engine-bay relay box | Fusible link No. 35, 80 A |
From the Mitsubishi workshop manuals for each generation. Relay positions differ between left- and right-hand-drive cars and between market versions, so trace the wiring if yours doesn’t match.
A quick way to tell a relay fault from a pump fault: with the ignition on, listen at the back of the car. If you hear nothing at all, check the relay, its fusible link and the earth before blaming the pump. Mitsubishi’s own check is simple — with 12 V across the relay coil, the switched contacts should close (2 Ω or less). More on the codes in Evo VII–IX codes 45, 46, 81 and 82 and Evo X codes C161E and C161C.
Where is the pressure sensor?
On the hydraulic unit itself, plugged in with its own connector next to the pump connector. That’s why a sensor problem and a pump problem look so alike from the outside — they live in the same box. On the VII–IX the pump connector is a black two-pin plug; on the X it’s grey.
Where is the ACD/AYC computer?
Inside the car, not near the pump. On most Evo VII–IX cars the 4WD-ECU sits behind the right-hand cowl side trim (in the passenger footwell area on left-hand-drive cars); on the Evo X the AWC-ECU is under the dashboard. You rarely need it — the ECU is the last thing on Mitsubishi’s diagnostic list for a reason.
Why does the location matter?
Because it explains a lot of failures. Sitting low at the back, by the wheel, the hydraulic unit sees road spray, salt and temperature swings for twenty-plus years. Internal corrosion is the most common root cause I find when I open these pumps — see ACD/AYC pump failure symptoms. It also means any work on the pump is a rear-of-car job: trims out, lines off, unit down, and the system has to be bled afterwards.
Parts for this job
Pick your car — each link goes straight to the part:
Can’t find it on your car? Send me a photo of what you’re looking at and I’ll point it out.

