October 30, 2026

What Is AYC (Active Yaw Control) and How Does It Work?

By STANISLAV, FOUNDER, ACD/AYC PUMPS · UPDATED OCT 30, 2026

How AYC shifts torque between the rear wheels, which Evos have it, what an AYC pump is and what fails.

What Is AYC (Active Yaw Control) and How Does It Work?

AYC is the half of the Evo’s drivetrain magic that people talk about least. ACD gets the attention because you can feel the Tarmac/Gravel/Snow modes, but Active Yaw Control is what makes an Evo rotate into a corner in a way a normal four-wheel-drive car doesn’t. It also depends on the same electric pump as ACD — so when the pump goes, AYC goes with it. Here’s what it is, how it works, which cars have it and what goes wrong.

SHORT ANSWER

AYC (Active Yaw Control) is Mitsubishi’s electronically controlled rear differential. Two hydraulic clutch packs move drive torque between the left and right rear wheels, which helps the car turn in and pull out of a corner. The pressure comes from the ACD/AYC pump; if the pump can’t build pressure, the ECU switches AYC off and the warning comes on.

What does AYC do?

A normal differential splits torque between the rear wheels and lets them turn at different speeds. AYC goes further: it actively sends more torque to one rear wheel than the other. Push more drive to the outside rear wheel and the car is helped to rotate (“yaw”) into the corner; push it to the inside wheel and the car is steadied. Mitsubishi’s own description breaks it into three phases:

What AYC does through a corner
BRAKING INTO THE CORNER
Torque to the inside rear wheel — calms the car so it doesn’t tuck in.
TURNING IN
Torque to the outside rear wheel, by steering angle and speed — sharper turn-in.
ON THE THROTTLE OUT
Torque to the outside rear wheel, by how hard you accelerate — less understeer on exit.

From Mitsubishi’s Evo VII technical description of the ACD/AYC control strategy.

ACD and AYC work together: while AYC handles left-to-right, ACD handles front-to-rear, loosening the centre differential on turn-in and tightening it on the way out.

How does AYC work?

The AYC rear differential — Mitsubishi calls it the AYC torque transfer differential — has a clutch pack on each side. Squeeze the right-hand clutch and torque moves towards the right wheel; squeeze the left and it moves left. Three parts decide how hard and which side:

  • The pump and accumulator (the hydraulic unit) supply the pressure — the same unit that feeds ACD.
  • The AYC proportional valve sets how much pressure goes to the clutches.
  • The directional valve chooses the left or right clutch.

The 4WD computer decides all of this many times a second from the wheel speed sensors, steering angle sensor, lateral and longitudinal G sensors, throttle position and the brake switches. That’s why a fault in any of those sensors can also switch AYC off.

What is an AYC pump?

There is no separate “AYC pump” on an Evo VII–X — there’s one hydraulic unit that feeds both systems, and people call it the ACD pump, the AYC pump or the ACD/AYC pump depending on which warning they’ve got. On the Evo IV–VI and the Galant VR-4, which have AYC but no ACD, the pump serves AYC alone (and used a pressure switch rather than a sensor). On cars with both systems, a weak pump takes out ACD and AYC at the same time. Where it sits on each car is in where the ACD/AYC pump is on each Evo.

Which cars have AYC?

CARACDAYC
Evo IV, V, VI · Galant VR-4—Yes (GSR versions)
Evo VII, VIII, IX GSR / MRYesYes
Evo VII, VIII, IX GT / RSYes or optionOption on some versions
US Evo VIII (2003–04)NoNo
US Evo VIII MR (2005), US Evo IXYesNo
Evo X GSR / MR (S-AWC)YesYes
Lancer RalliartYesNo

Specifications varied by market and year. If you’re not sure what your car has, send me the VIN.

On the Evo X, AYC is part of S-AWC (Super All Wheel Control), which ties ACD, AYC, stability control and ABS together. On the Evo VIII Mitsubishi introduced “Super AYC”, a revised rear differential able to move more torque across the axle.

What goes wrong with AYC?

  • The pump. By far the most common cause of an AYC warning. Corrosion and wear inside the hydraulic unit mean it can’t reach pressure, the ECU disables AYC and ACD and the light comes on. See ACD/AYC pump failure symptoms.
  • Sensors and wiring. Wheel speed, steering or G-sensor faults switch the system off too — read the codes before buying parts (Evo VII–IX codes, Evo X codes).
  • The wrong oil in the rear diff. The AYC differential has two separate compartments: gear oil for the gears, ATF SP III for the clutch pack. Mixing them up leads to noise and judder — details in ACD/AYC fluid: type and change.
  • Mismatched tyres. Different tyre sizes or very uneven wear confuse the wheel-speed comparison; Mitsubishi even has a fault code for it.

Mitsubishi’s manual also lists rear-tyre noise on slow, tight corners and noise from the rear differential when turning as AYC-related symptoms worth checking.

Can you drive with AYC switched off?

Yes — when the ECU disables AYC the car still drives, it just loses the active help: less willing to turn in, more push on the way out of a corner. It isn’t an emergency, but a pump that can’t reach pressure tends to run longer and harder until the motor fails too, so it’s worth fixing sooner rather than later. In most cases a rebuilt pump brings AYC back.

Parts for this job

Pick your car — each link goes straight to the part:

Related guides

Related units